HAMILTON SYRINGE TERMINATIONS
N
Cemented Needle
Not autoclavable
Needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark
Not recommended for use with halogenated solvents, such as MeCl2
LTN
Luer Tip Cemented Needle
Not autoclavable
Needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark
Not recommended for use with halogenated solvents, such as MeCl2
RN
Removable Needle
Advantageous for laboratories with multiple users
Economical since you can replace the needle without having to purchase a new syringe
Removable needles seat precisely to the zero graduation mark of the syringe
Autoclavable when disassembled
Allows the use of different specification needles on the same syringe barrel
LT
Luer Tip
Ground glass syringe barrel with a male luer taper accepts most hypodermic needles
Autoclavable when disassembled
Use Kel-F® hub needles and connectors for a tight seal
TLL
TEFLON® Luer Lock (with or without slots)
Male luer taper with nickel-plated brass hub accepts and locks in place, luer hub needles and connectors
Autoclavable when disassembled
Used with Hamilton diluters/dispensers, in OEM applications and in manual operations
KH
Knurled Hub
Removable needle, knurled hub is used on 7000 Series syringes, exclusively
Autoclavable when disassembled
Knurled hub enables 6000 psig maximum injection pressures and the attachment of a spacer for repeatable depth injections
CA
Carbon Analyzer
Special male luer tapered hub is cemented on the syringe barrel
Not autoclavable
Used with TOC (total organic carbon) analyzers
SL
SampleLock™
On/Off syringe valve with RN needle is cemented to a syringe barrel
Not autoclavable
Used for headspace, environmental sample collection and storage, pre-pressurization of gaseous samples for GC analysis ad sample spiking